华为模拟器ipv6接口配置

2013-10-26 00:06 浏览:

　　华为模拟器ipv6接口配置

　　本实验所需命令：

　　1.ipv6

　　2.ipv6 enable

　　3.ipv6 address ??????

　　4.display ipv6 interface g ?/?/?(用来查看ipv6配置是否正确

　　全球单播地址为3001::1/64和3001::2/64

　　实验需求：

　　让路由器有ipv6转发功能

　　给路由器互连的两个接口配置全球单播地址

　　所需设备两台路由器即可

　　以下是拓扑图：

　　详细步骤如下：

　　AR1：

　　sys

　　Enter system view, return user view with Ctrl+Z.

　　[Huawei]ipv6

　　[Huawei]interface GigabitEthernet 0/0/0

　　[Huawei-GigabitEthernet0/0/0]ipv6 enable

　　[Huawei-GigabitEthernet0/0/0]ipv6 address 3001::1/64

　　[Huawei-GigabitEthernet0/0/0]

　　Oct 25 2013 10:39:06-05:13 Huawei IPV6/2/IF_IPV6CHANGE:OID 16777216.50331648.100663296.16777216.33554432.16777216.922746880.33554432.0.16777216 The status of the IPv6 Interface changed. (IfIndex=50331648, IfDescr=HUAWEI, AR Series, GigabitEthernet0/0/0 Interface, IfOperStatus=16777216, IfAdminStatus=16777216)

　　[Huawei-GigabitEthernet0/0/0]

　　Oct 25 2013 10:39:06-05:13 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IPv6 on the interface GigabitEthernet0/0/0 has entered the UP state.

　　[Huawei-GigabitEthernet0/0/0]

　　AR2：

　　sys

　　Enter system view, return user view with Ctrl+Z.

　　[Huawei]ipv6

　　[Huawei]interface GigabitEthernet 0/0/0

　　[Huawei-GigabitEthernet0/0/0]ipv6 enable

　　[Huawei-GigabitEthernet0/0/0]ipv6 address 3001::2/64

　　[Huawei-GigabitEthernet0/0/0]

　　Oct 25 2013 10:41:02-05:13 Huawei IPV6/2/IF_IPV6CHANGE:OID 16777216.50331648.100663296.16777216.33554432.16777216.922746880.33554432.0.16777216 The status of the IPv6 Interface changed. (IfIndex=50331648, IfDescr=HUAWEI, AR Series, GigabitEthernet0/0/0 Interface, IfOperStatus=16777216, IfAdminStatus=16777216)

　　[Huawei-GigabitEthernet0/0/0]

　　Oct 25 2013 10:41:02-05:13 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IPv6 on the interface GigabitEthernet0/0/0 has entered the UP state.

　　[Huawei-GigabitEthernet0/0/0]

　　验证一下：